Where to Buy Steel Bars in Lahore, Karachi & Islamabad – Why Kamran Steel is the Trusted Choice

What Is Saria? Saria, Sariya and Loha in English (With a Builder’s Glossary)

Saria (also written sariya or sarya) is the Urdu and Punjabi word for a steel reinforcement bar. In English it is called rebar, short for “reinforcing bar”. Builders also call it loha (iron), iron rod, TR bar or deformed bar. All of these names mean the same thing: the ribbed steel bars placed inside concrete to make it strong.

Saria (steel reinforcement bars, also called rebar) used in construction in Pakistan

Saria in English: Quick Answer

Word you hear on siteEnglish term
Saria / sariya / saryaSteel reinforcement bar (rebar)
LohaIron; on a building site it usually means saria
TR bar / tor barRibbed (deformed) reinforcement bar
Sadi sariaPlain round bar (no ribs)

Why Is Saria Needed in Concrete?

Concrete is very strong when it is squeezed (compression) but weak when it is pulled or bent (tension). A roof slab or beam bends under load, so the bottom of it is pulled apart. Steel is strong in tension, so bars are placed where the concrete is pulled. Together they form RCC (reinforced cement concrete).

Is Saria Iron or Steel?

People say loha (iron), but modern saria is steel: iron with a small, controlled amount of carbon and other elements. In Pakistan most reinforcement bars are made by melting steel scrap into billets and hot-rolling the billets into bars. The ribs (deformations) are rolled onto the surface so the bar grips the concrete. See deformed vs plain bars.

Grades of Saria

The grade tells you the bar’s minimum strength. Under the ASTM A615 standard used in Pakistan:

  • Grade 40: minimum yield strength 40,000 psi (280 MPa), used for lighter work.
  • Grade 60: minimum yield strength 60,000 psi (420 MPa), the usual choice for columns, beams and slabs.

More detail: Grade 40 vs Grade 60 steel.

Sizes: Sutar, Inches and Millimetres

On site, sizes are often given in sutar (soot). One sutar is 1/8 inch, so 3 sutar is 3/8 inch (about 10 mm), 4 sutar is 1/2 inch (12 mm), and 8 sutar is 1 inch (25 mm). A full chart is in our guide to saria sizes.

A Builder’s Glossary (Urdu Site Words in English)

Site wordEnglish meaning
Lanter / linterRoof slab (from “lintel”)
Chhalla / ringStirrup (in beams) or tie (in columns)
JaalMesh of bars in a slab or footing
ManMaund, 40 kg
Sutar / soot1/8 inch (bar size)
BandhaiTying bars with binding wire
CoverConcrete between the bar and the outside face
Lap / jorOverlap where two bars meet

How Saria Is Sold in Pakistan

Saria is sold by weight, not by piece: per kg, per 40 kg (one man) or per ton (1,000 kg). The price depends on the grade. Kamran Steel publishes one official rate for the whole country on its steel rate page.

Frequently Asked Questions

What is sariya called in English?

Sariya is called a steel reinforcement bar, or rebar, in English.

What is loha in English?

Loha means iron. On a construction site, “loha” usually refers to steel reinforcement bars (saria).

What does rebar mean in Urdu?

Rebar means saria (سریا): the steel bars used inside concrete.

Is TMT the same as saria?

TMT (thermo-mechanically treated) bars are one type of saria. See TMT vs cold twisted bars.

Related: Common steel bar questions answered · Why reinforcement bars matter in modern construction

About Kamran Steel

Kamran Steel has manufactured Grade 40 and Grade 60 deformed steel bars in Lahore since 1984, in sizes from 10 mm to 36 mm, with dealers in 20+ cities.