Steel Stress-Strain Curves Explained for Civil Engineers

Saria Sizes in Pakistan: Sutar to mm and Inch Chart (With Weights)

Saria sizes in Pakistan are spoken in sutar (soot), written on drawings in millimetres, and sometimes listed by the American bar number (#). This chart puts all three side by side, with the weight of each size, so you can check orders and deliveries.

Saria sizes from 10 mm to 25 mm compared side by side

What Is a Sutar?

One sutar (soot) is 1/8 inch. So a “3 sutar” bar is 3/8 inch, a “4 sutar” bar is 4/8 = 1/2 inch, and an “8 sutar” bar is 1 inch. The ASTM bar number works the same way: #3 is 3/8 inch, #4 is 4/8 inch, and so on.

Saria Size Chart: Sutar, Inch, # and mm

SutarInchASTM bar no.Exact # diameterNearest metric size
3 sutar3/8″#39.5 mm10 mm
4 sutar1/2″#412.7 mm12 mm
5 sutar5/8″#515.9 mm16 mm
6 sutar3/4″#619.1 mm20 mm
7 sutar7/8″#722.2 mm22 mm
8 sutar1″#825.4 mm25 mm
–1 1/8″#928.7 mm29 mm
–1 1/4″#1032.3 mm32 mm
–1 3/8″#1135.8 mm36 mm

Weight of Each Size (Metric Bars)

SizeWeight per footWeight per metreOne 12 m bar
10 mm0.188 kg0.617 kg7.45 kg
12 mm0.270 kg0.886 kg10.69 kg
16 mm0.481 kg1.578 kg19.05 kg
20 mm0.751 kg2.463 kg29.74 kg
22 mm0.909 kg2.982 kg36.00 kg
25 mm1.175 kg3.854 kg46.53 kg
29 mm1.573 kg5.159 kg62.29 kg
32 mm1.925 kg6.314 kg76.23 kg
36 mm2.436 kg7.990 kg96.47 kg

Weight of Each Size (# Bars)

BarWeight per footWeight per metreOne 12 m bar
#30.170 kg0.558 kg6.73 kg
#40.303 kg0.994 kg12.00 kg
#50.473 kg1.551 kg18.73 kg
#60.681 kg2.234 kg26.97 kg
#70.928 kg3.044 kg36.75 kg
#81.210 kg3.969 kg47.92 kg

Source: Kamran Steel products page.

Watch Out: “4 Sutar” Can Mean Two Different Bars

A #4 bar (12.7 mm) weighs about 12% more than a 12 mm bar (0.994 kg/m against 0.886 kg/m). Because saria is sold by weight, always confirm whether your drawing and your order mean 12 mm or #4 (1/2 inch). The same applies to 3 sutar (#3 is lighter than 10 mm).

Standard Length of Steel Bars in Pakistan

The standard length is 12 metres (about 39 feet 4 inches). Kamran Steel can also roll other lengths on order. Longer bars mean fewer laps; see lap length of steel bars.

Which Size Goes Where?

Sizes are always set by the structural engineer. In typical house drawings you will often see smaller bars (10–12 mm) for slab mesh, stirrups and ties, and larger bars (16–25 mm) for beams, columns and footings. Do not change sizes on site without the engineer’s approval. To turn sizes into cutting lengths and weights, see our bar bending schedule guide.

Frequently Asked Questions

How many mm is 4 sutar saria?

4 sutar is 1/2 inch. That is a #4 bar of 12.7 mm, and in metric orders the nearest size is 12 mm. Check which one your order means.

How many mm is 3 sutar saria?

3 sutar is 3/8 inch: a #3 bar of 9.5 mm, or a 10 mm bar in metric sizes.

What sizes does Kamran Steel make?

Kamran Steel rolls deformed bars from 10 mm to 36 mm in Grade 40 and Grade 60. The price per kg is the same for every size of the same grade.

See today’s steel rate in Pakistan for the current price per kg and per ton.