Saria (also written sariya or sarya) is the Urdu and Punjabi word for a steel reinforcement bar. In English it is called rebar, short for “reinforcing bar”. Builders also call it loha (iron), iron rod, TR bar or deformed bar. All of these names mean the same thing: the ribbed steel bars placed inside concrete to make it strong.

Saria in English: Quick Answer
| Word you hear on site | English term |
|---|---|
| Saria / sariya / sarya | Steel reinforcement bar (rebar) |
| Loha | Iron; on a building site it usually means saria |
| TR bar / tor bar | Ribbed (deformed) reinforcement bar |
| Sadi saria | Plain round bar (no ribs) |
Why Is Saria Needed in Concrete?
Concrete is very strong when it is squeezed (compression) but weak when it is pulled or bent (tension). A roof slab or beam bends under load, so the bottom of it is pulled apart. Steel is strong in tension, so bars are placed where the concrete is pulled. Together they form RCC (reinforced cement concrete).
Is Saria Iron or Steel?
People say loha (iron), but modern saria is steel: iron with a small, controlled amount of carbon and other elements. In Pakistan most reinforcement bars are made by melting steel scrap into billets and hot-rolling the billets into bars. The ribs (deformations) are rolled onto the surface so the bar grips the concrete. See deformed vs plain bars.
Grades of Saria
The grade tells you the bar’s minimum strength. Under the ASTM A615 standard used in Pakistan:
- Grade 40: minimum yield strength 40,000 psi (280 MPa), used for lighter work.
- Grade 60: minimum yield strength 60,000 psi (420 MPa), the usual choice for columns, beams and slabs.
More detail: Grade 40 vs Grade 60 steel.
Sizes: Sutar, Inches and Millimetres
On site, sizes are often given in sutar (soot). One sutar is 1/8 inch, so 3 sutar is 3/8 inch (about 10 mm), 4 sutar is 1/2 inch (12 mm), and 8 sutar is 1 inch (25 mm). A full chart is in our guide to saria sizes.
A Builder’s Glossary (Urdu Site Words in English)
| Site word | English meaning |
|---|---|
| Lanter / linter | Roof slab (from “lintel”) |
| Chhalla / ring | Stirrup (in beams) or tie (in columns) |
| Jaal | Mesh of bars in a slab or footing |
| Man | Maund, 40 kg |
| Sutar / soot | 1/8 inch (bar size) |
| Bandhai | Tying bars with binding wire |
| Cover | Concrete between the bar and the outside face |
| Lap / jor | Overlap where two bars meet |
How Saria Is Sold in Pakistan
Saria is sold by weight, not by piece: per kg, per 40 kg (one man) or per ton (1,000 kg). The price depends on the grade. Kamran Steel publishes one official rate for the whole country on its steel rate page.
Frequently Asked Questions
What is sariya called in English?
Sariya is called a steel reinforcement bar, or rebar, in English.
What is loha in English?
Loha means iron. On a construction site, “loha” usually refers to steel reinforcement bars (saria).
What does rebar mean in Urdu?
Rebar means saria (سریا): the steel bars used inside concrete.
Is TMT the same as saria?
TMT (thermo-mechanically treated) bars are one type of saria. See TMT vs cold twisted bars.
Related: Common steel bar questions answered · Why reinforcement bars matter in modern construction
About Kamran Steel
Kamran Steel has manufactured Grade 40 and Grade 60 deformed steel bars in Lahore since 1984, in sizes from 10 mm to 36 mm, with dealers in 20+ cities.


