Saria sizes in Pakistan are spoken in sutar (soot), written on drawings in millimetres, and sometimes listed by the American bar number (#). This chart puts all three side by side, with the weight of each size, so you can check orders and deliveries.

What Is a Sutar?
One sutar (soot) is 1/8 inch. So a “3 sutar” bar is 3/8 inch, a “4 sutar” bar is 4/8 = 1/2 inch, and an “8 sutar” bar is 1 inch. The ASTM bar number works the same way: #3 is 3/8 inch, #4 is 4/8 inch, and so on.
Saria Size Chart: Sutar, Inch, # and mm
| Sutar | Inch | ASTM bar no. | Exact # diameter | Nearest metric size |
|---|---|---|---|---|
| 3 sutar | 3/8″ | #3 | 9.5 mm | 10 mm |
| 4 sutar | 1/2″ | #4 | 12.7 mm | 12 mm |
| 5 sutar | 5/8″ | #5 | 15.9 mm | 16 mm |
| 6 sutar | 3/4″ | #6 | 19.1 mm | 20 mm |
| 7 sutar | 7/8″ | #7 | 22.2 mm | 22 mm |
| 8 sutar | 1″ | #8 | 25.4 mm | 25 mm |
| – | 1 1/8″ | #9 | 28.7 mm | 29 mm |
| – | 1 1/4″ | #10 | 32.3 mm | 32 mm |
| – | 1 3/8″ | #11 | 35.8 mm | 36 mm |
Weight of Each Size (Metric Bars)
| Size | Weight per foot | Weight per metre | One 12 m bar |
|---|---|---|---|
| 10 mm | 0.188 kg | 0.617 kg | 7.45 kg |
| 12 mm | 0.270 kg | 0.886 kg | 10.69 kg |
| 16 mm | 0.481 kg | 1.578 kg | 19.05 kg |
| 20 mm | 0.751 kg | 2.463 kg | 29.74 kg |
| 22 mm | 0.909 kg | 2.982 kg | 36.00 kg |
| 25 mm | 1.175 kg | 3.854 kg | 46.53 kg |
| 29 mm | 1.573 kg | 5.159 kg | 62.29 kg |
| 32 mm | 1.925 kg | 6.314 kg | 76.23 kg |
| 36 mm | 2.436 kg | 7.990 kg | 96.47 kg |
Weight of Each Size (# Bars)
| Bar | Weight per foot | Weight per metre | One 12 m bar |
|---|---|---|---|
| #3 | 0.170 kg | 0.558 kg | 6.73 kg |
| #4 | 0.303 kg | 0.994 kg | 12.00 kg |
| #5 | 0.473 kg | 1.551 kg | 18.73 kg |
| #6 | 0.681 kg | 2.234 kg | 26.97 kg |
| #7 | 0.928 kg | 3.044 kg | 36.75 kg |
| #8 | 1.210 kg | 3.969 kg | 47.92 kg |
Source: Kamran Steel products page.
Watch Out: “4 Sutar” Can Mean Two Different Bars
A #4 bar (12.7 mm) weighs about 12% more than a 12 mm bar (0.994 kg/m against 0.886 kg/m). Because saria is sold by weight, always confirm whether your drawing and your order mean 12 mm or #4 (1/2 inch). The same applies to 3 sutar (#3 is lighter than 10 mm).
Standard Length of Steel Bars in Pakistan
The standard length is 12 metres (about 39 feet 4 inches). Kamran Steel can also roll other lengths on order. Longer bars mean fewer laps; see lap length of steel bars.
Which Size Goes Where?
Sizes are always set by the structural engineer. In typical house drawings you will often see smaller bars (10–12 mm) for slab mesh, stirrups and ties, and larger bars (16–25 mm) for beams, columns and footings. Do not change sizes on site without the engineer’s approval. To turn sizes into cutting lengths and weights, see our bar bending schedule guide.
Frequently Asked Questions
How many mm is 4 sutar saria?
4 sutar is 1/2 inch. That is a #4 bar of 12.7 mm, and in metric orders the nearest size is 12 mm. Check which one your order means.
How many mm is 3 sutar saria?
3 sutar is 3/8 inch: a #3 bar of 9.5 mm, or a 10 mm bar in metric sizes.
What sizes does Kamran Steel make?
Kamran Steel rolls deformed bars from 10 mm to 36 mm in Grade 40 and Grade 60. The price per kg is the same for every size of the same grade.
See today’s steel rate in Pakistan for the current price per kg and per ton.


